Product Description
Airdog Fuel Systems
2008-2010 FORD POWERSTROKE TURBO DIESEL 6.4L
Part# A4SPBF170
Original Airdog System FP-100
Preset at 10 psi
FREE CONTINENTAL US SHIPPING
Alaska, Hawaii, Puerto Rico, and International Buyer please email for a shipping quote
Features:
- Removes Air and Vapor from Diesel Fuel
- Pure Diesel Fuel Reaching Engine
- High Flow Rates of Fuel to Engine
- Longer Injector Life
- Increased Injection Pump Life
- Increased Fuel Economy
- Optimized Engine Performance
- Increased Torque Output
- Improves Throttle Response
- Small & Compact:Only 7L X 10T X 3.2W
- Single Piece Pump Body:Replaces the old 3 piece pump design reducing the number of parts, unit size, and weight. This results in a sleek, low profile pump assembly and eliminates the need for leaky, messy gaskets!
- Mounts To Frame:No Drilling Required!
Description:
The AirDog Fuel Preporator, with the capability to provide fuel at flows and pressures beyond the maximum requirements of the engine, receives fuel under vacuum from AirDog - The Original Fuel/Air Separation Systemthe fuel tank containing entrained air/vapor, particulate contaminates and unknown quantities of moisture. The fuel passes through the water separator which removes the water and large particulate contaminates that could damage or jam the gerator fuel pump. The fuel, with only entrained air/vapor and tiny particulate contaminates remaining, enters the fuel pump.
The fuel, now under positive pressure flow, enters the filter. As the fuel passes through the filter media and the remaining particulate contaminates are caught and contained, the entrained air/vapor is also separated. Through the positive fuel air separation features of the patented Fuel Preporator the separated air/vapor is discharged from the filter through the Primary Air/Vapor Discharge Port and into the return to tank passage after the regulator. The fuel passing through the filter media (free of contaminates & power robbing air/vapor and at pressures and flows to meet the needs of the engine exits the fuel filter through two passageways. The fuel for the engine, passes into the fuel pickup tube and out to the engine).
The excess fuel not needed by the engine is released through the pressure regulator to combine with the air/vapor and foam as it returns to the fuel tank. The regulator controls the fuel pressure to the engine.
This is the AirDog I FP-100 fuel system for the 2008-2010 Ford Powerstroke 6.4L. This fuel system replaces your factory low pressure frame rail mounted pump. This system mounts to the frame rail using the supplied sandwich plate mounting system. Fuel is picked up through the factory suction line, in the fuel module, to feed the AirDog. The pressure side connects directly to the factory injection pump feed line on the frame. The AirDog Air/Vapor return is sent back to the tank through a filler neck tee. This is a 100GPH (Gallon Per Hour) fuel system. Check out our installation manual for a list of parts that are included with this kit.
AirDog Installation Kit:
- Relay Control Wiring Harness
- 1/2' Suction Tube (when required)
- All Fuel Fittings Required
- Mounting Hardware
- 1/2' Fuel Lines W/ OEM Style Quick Connect Fittings
- AirDog Bracket & Spacer
- Plastic Ties
- Installation Manual
